hygger Mini Intelligent Auto Top Off System with Magnetic Mount ATO Controller Water Refill Saltwater Reef Tank Supplies up to 60 Gallon Aquarium
hygger Mini Intelligent Auto Top Off System with Magnetic Mount ATO Controller Water Refill Saltwater Reef Tank Supplies up to 60 Gallon Aquarium
Read more Hygger ATO Systems are a device that monitors and automatically adds freshwater to an aquarium to replace the lost water that the aquarium evaporates. Safely keep water & salinity levels (in marine aquariums) stable. Features: All functions are clearly displayed by colored LEDs and warning signals.It has built-in fail-safes to keep the tank from overflowing.There be an UPPER LIMIT sensor that will tell the unit to stop filling as the aquarium is now back to full.There be a LOWER LIMIT sensor that senses the water drop from evaporation, which then tells the device to start filling.For reef aquariums, saltwater aquariums, freshwater aquariums. Light Indication and Alarm Failure All lights flashing and alarm Inaccurate ATO monitor sensor calibration: Wipe the monitor and the fish tank, remove the external monitor and set it down horizontally re-calibrate.Overfill Protection: Remove the ATO monitor sensor, reposition and clean the tank wall.Keep away from places with bubbles and waves, and place on a calm water surface that it will work normally. Plastic hose holder keeps hose stay in place For rimmed or rimless aquariums up to 3/4 inch.Make sure the water hose be installed above the water level so it won't siphon when the pump cuts off.5.9ft soft pipe. Two ways to install external sensors Installed external sensor on the reservoir wall. (The external sensor should be higher than the water pump ensuring that the pump does not burn out as a result of water drying out.) Put it in the reservoir if the tank wall too thick.Cable Length: 5.1 ft Put the water pump into the bottom of the reservoir DC 12V 5WHead max:6.5FTFlow rate max:74 GPHCable Length: 6 ft The max lift is 4.9 ft. So make sure the height from water pump to aquarium is not higher than 4.9ft. Read more Read more Horizontal mounts on the clear tank wall When installing make sure to place the ATO higher than the water level.Place the water hose somewhere away from the ATO internal monitor.ATO internal monitor should be avoided ripples. otherwise, it is incapable of sense water level and affects its performance.Please always keep the ATO internal sensor clean. Otherwise, the sensor will lose its sensitivity and malfunction. ATO external monitor not waterproof. Package Includes: ATO Monitor x 1External Sensor x 1DC Water Pump x 112V DC Power Adapter x 15.9ft Water Pipe x 1Pipe Holder x 1User Manual x 1 Read more
Product Features
- How does it WorkAutomatic top off system with 2 optical sensors monitors and replenishes evaporated water each day. A great time and energy saver for saltwater tank fish keeper especially when you are not at home.
- Fail-Safe Designbuild in two set of sensors, hygger auto top off keeps track of the water line of aquarium/sump tank. ATO monitoring sensor which keep a constant watch on the water level in your tank, and when it drops below a certain level and the water pump will be activated to automatically refill the tank. While the external sensor monitors reservoir's water level to ensure the water pump not running dry as a result of water drying out.
- Overfill ProtectionUse a top probe to sense the high water level, the ATO sensor alerts with flashing led light and beeping sound if there is any malfunctioning with the device itself, auto shut off the water pump when the water level exceeds the desired maximum top off level. It to be used in both marine and freshwater aquariums up to 60 gallon.
- Enable Drain Out Water Comes with a mini DC-powered water pump and a soft hose which can effectively pumps water from bucket/jug with a head height of up to 2 meters. Vice versa. It can also drain dirty water out of the tank. Flow rate: 74gph.
- Packing Include 1 x ATO monitor sensor; 1 x external sensor; 1 x water pump; 1 x 5.9 ft soft hose; 1 x hose holder; 1 x user manual. A read-to-go kit out of box, it is easily installed via a magnetic mounting which can be used on tank glass up to 1/2'' (12mm) thickness.
Buy with confidence as this product comes with 18 months full local warranty in Australia & New Zealand (unless otherwise stated in the overview).
This product also comes with the benefits of the Warranty. For further details please read our Warranty Guidelines.
You can also purchase 3 Year Extended Care. If you are interested please see our Extended Care Information.